factories needed to build them changed the way people worked.
The car-and its backseat- even changed the way young people dated.
Henry Ford (July 30, 1863 – April 7, 1947) was the American founder of the Ford Motor Company and father of modern assembly lines used in mass production. His introduction of the Model T automobile revolutionized transportation and American industry.
부족에 적극 대응.
ALC (Assembly Line Control)시스템을 도입하여 부품의 서열화.
- 1980년 생산 및 자재관리의 혁신을 도모.
제 1공장(포니엑셀) , 2공장(소나타), 3공장(엔란트라) 준공.
단일공장으로 세계 최대 생산규모인 연간 100만대 생산체제 확립
전 공장의 Transformation – 자동화율 90% 달성.
1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
Nanoparticles present possible dangers
- due to the high surface to volume ratio
pass through cell membranes in organisms
Smaller nanoparticles evinced increased cytotoxicity.
Self-assembly :
process that disordered system of components forms an organized structure or pattern
The device is switched on - >
the pump pushes ions across the lipid membrane,
Ⅰ. 서론
공정선택의 의사결정에서는 제품 또는 서비스를 생산하는데 사용되는 공정의 유형을 결정한다. 예를 들어, 조립라인공정은 자동차 생산, 배치(batch)공정은 와인 생산, 잡숍(jab shop)공정은 맞춤양복생산에 활용된다. 이에 공정은 제품의 생산량의 크기와 제품이 표준화 또는 고객화를 기준으
assembly plant of high operating standard in Alabama; an engineering facility in Michigan; and a Research & Design center in California. Hyundai is highly evaluated for brand quality and environment-friendly sectors by J.D.Power and Associates. In US news and world report, seven of its vehicles were included in the "Best Cars 2008: The Thrifty 50"list.
1.2. Mission/ Objectives/ Strategies
Hy
2. 표면처리 (전처리)
도료는 도장을 하기 위한 제품에 불과하며 도장 작업에 관계없이 도료의 품질에 따라 도장효과가 좋게 나타나는 것은 아니다. 도장 효과(도막 성능)에 미치는 도료의 기여도는 5%에 불과하며 나머지 95%는 여러 가지 도장에 관계되는 기타 인자 (표면처리도, 도장 환경, 도막 두께,
사용방법에 따라 조금씩 차이가 난다. 또한 작동 원리에 따른 분류로는 크게 positive displacement 펌프와 entrapment 펌프로 나눌 수 있다.
- positive displacement 펌프 : 기체를 진공 용기 외부로 제거하는 펌프로 로터리 펌프(rotary vane pump), 터보 분자 펌프(turbo-molecular pump) 등 대부분의 기계적인 펌프
화상을 입을 수 있음. * 상기 보호구 착용 必
1. 전자저울 Setting
촉매의 정량 투입량을 확인하기 위해
전자저울을 Setting한다.
반드시 영점을 확인한다.
2. 촉매 전용 Diaphragm Pump 준비
타 용제와 혼용되지 않도록 "촉매 전용의
Diaphragm Pump"를 준비한다.
Hose는 SUS 재질을 필히 사용한다.